IMPORTANT – WALL MOUNTING & SAFETY INSTRUCTIONS

WARNING – SECURE WALL FIXING REQUIRED

The Bruns Tool Holder system must be securely fixed to a suitable wall or supporting structure before use.

1.   Ensure the wall or supporting surface is structurally sound and capable of supporting the combined weight of the rail, holders and stored tools.

2.   Use appropriate screws, plugs, anchors or other fixing devices suitable for the wall construction and material.

3.   For timber-framed walls, fix directly into suitable structural studs wherever possible.

4.   For brick, concrete or masonry walls, use appropriate masonry fixings.

5.   For plasterboard secure a mounting rail to the underlying structural framing.

6.   Do not rely on adhesive, double-sided tape or other non-mechanical fixing methods.

7.   Check that all fixings are firmly tightened and that the rail is securely mounted before loading tools.

8.   Do not exceed the recommended load capacity of the product or its mounting system.

9.   Inspect the rail, mounting points and fixings periodically for looseness, wear or damage.

INSTALLATION RESPONSIBILITY

The installer is responsible for selecting and correctly installing fixings appropriate to the wall material, construction and intended load. If you are unsure about the suitability of the wall or fixing method, consult a qualified tradesperson.